I come form Baltec marine company. And this time, we will start the cable pulling, but from our cable list, we found out cable type have 2option for exhaust gas damper 1/2/3 to scrubber GE, and air sealing fan system. etc.(1*2*0.75 or 2*2*0.75). and also , we check the drawing diagram: 10x14-ALL-SER-VAL-EEA-0008_3_IFP Instrument circuit diagram. The solenoid valve and limit switches only 2coils for wire connection. So we need to confirmed from your side if we pulling the cable 1*2* 0.75 , there is a problem or not?