Test the product on a non-visi- ble surface, before using any fluids. Acrylic surfaces should only be wiped with a very soft, dry cloth. Small scratches may be removed with fiberglass polish. Fingerprints may be removed with a damp cloth. Do NOT use spirits or paper tissue. SAFETY Placement: Do not place your Diablo on top INSTRUCTIONS of any heat producing products, such as power amplifiers or DACs. If you place the Diablo inside any Hi-FI furniture or cab- inets, there must be a clearance of a minimum of 10cm (4 inch- es) above the product and a minimum of 5cm (2 inches) along the sides. To allow a flow of cooling air the back of the cabinet must be open. If these guidelines are not observed, overheating may result. Mains Switch: To place your Diablo into stand- by mode use the main switch. The switch is located in the bot- tom on the right side just beneath the acrylic front panel. 16 ----------------------- Page 17-----------------------