1. The correct cavity sides are now

1. The correct cavity sides are now fitted, thank you2. The door slata are very much improved, thank you3. The step on the body side has been removed, thank you4. All steps are present and correct, thank you5. The rectangular recess is on the correct side only, thank you6. The 2 off location holes for L10069 are very much improved, thank you7. The dwell has been removed, thank you8. The curved witness line is still very slightly visible but only because of the slight difference in surface texture. This will be acceptable if un-noticeable after painting.9. On ML-34498, there is stressing present on the back wall around the lower handrail stacnchion holes. please investigate and correct. (See Picture)10. Although much improved, can you please try to further improve the insert mis-match on the top surface of the parts, thank you11. Please ensure that when de-gating of the moulding takes place, extra care is taken not to damage the mouldings. A few of the de-gated samples provided had damage on the top edge, which will be unacceptable, thank you. (See Picture)