A first plausibility check of the transmitted weighing values is carried out in FC3 NW17.the upper limit can be adjusted if required.In DB3, DW4 is used to enter the weight transferred from the scale at which the system shouldsystem should go to "Fault overload". (target load + empty weight pallet + tolerance 1%)In case of format-dependent overload (pallets which are not designed for the maximum weight)the second limit weight must also be entered here.If weighing is not possible or if the scale delivers an implausible weight value(less than 100 kg, greater than 5500 kg) or no stability is reached within the maximum weighing time, the programstability is reached within the maximum weighing time, the program enters the value "9999" as an error.