The electrical installation of this machine will require the reconnection of a series of cables that run from the Spectrum’s machine base to the X1 disconnect panel and the connection of the customer’s power drop to the system’s power circuit.610 The series of cables that run from the machine base to the X1 disconnect panel include a 12 AWG.611 5 conductor cable, an 18 AWG.612 12 conductor cable, an ethernet cable, and three safety grounds.613 During disassembly, these cables will be disconnected at the X1 disconnect panel and will remain their connections with the machine base.614 For reconnecting these cables and their conductors, first feed these cables into the X1 disconnect panel by reestablishing their liquid tight carrier connection with the X1 disconnect panel.