Cabling Coronary Tools. [item 0095].Take the two network cables and unroll them 6 turns on the side with the labels WJ-X31 and WJ-X33.Insert the cables over the third bracket from the bottom (left side) and run them to the right through the second bracket from the bottom and let cables protrude +/- 25 cm under the bracket (see drawing 1).Route these cables neatly over the bracket and secure them to the 5th hole from the right and the 8th hole from the left with cable tie [item 0752/0095] (in holes 2 and 3 of the bracket).Loop cables and secure with 2x tyrap [item 0752/0095] (see drawing 1).Also secure the cable on the side of the third bracket from below with [item 0752/0095] (do not tighten yet).Hang the cables temporarily on the top bracket with a plastic hook